Hot melt coater - cleaning method

Hot melt coater - cleaning method

Cleaning of coated cutter head: wipe it with dry gauze after the equipment is heated. Roller cleaning: the stainless steel roller shall be wiped with clean dry gauze dipped in 75% alcohol. If glue is found on the surface, wipe with dry gauze dipped in 1620 solvent / ethyl acetate solvent;

The glue on the surface of the rubber roller shaft shall not be treated with organic solvent to avoid damaging the rubber roller shaft. It shall be removed with strong adhesive curing adhesive. External surface of equipment; Cleaning method: wipe with clean dry gauze dipped in 75% alcohol. Batch change cleaning: cleaning of glue box and hose of hot melt glue coater (applicable to changing glue model and coating method): after emptying the original glue, add 2 ~ 3kg of new glue, heat it until it is completely drained after Quan melting, and then add new glue. After Quan melting, drain at least 1kg and start formal production.