What is the process of coating machine cao?

                                                                  What is the process of coating machine cao?

Protective film coater is mainly used for surface coating process production of film and paper. This machine is used to apply a layer of glue, paint or ink with specific function to rolled substrate, and then roll it after drying. It adopts a special multi-function coating head, which can realize the production of various forms of surface coating. The roll in and roll out of the protective film coater are equipped with a full speed automatic film splicing mechanism, and the PLC program tension closed-loop automatic control.

What is the process of coating machine cao? Today, let's talk about:

1. The staff shall wear labor protection appliances.

2. Check whether the scraper and back roll are wiped clean.

3. Put on the traction cloth when the machine is stopped.

4. Turn on the main power supply, servo motor, drying fan and other switches.

5. Fix the Grating paper and pull it to the oven to connect it with the traction cloth.

6. Install the trough and baffle plate, put the Yunnan white ointment slurry into the hopper, and level it with a bar.

7. Set the coating temperature, speed, speed ratio and coating tension on the controller according to the following table.

Yitong Industry and Trade (Shanghai) Co., Ltd. provides new products and new process solutions. We not only provide equipment, but also provide new European technologies and processes to Chinese customers through the carrier of equipment. The main equipment is precision coating, mainly including lithium battery coating, optical film coating, brand tape coating, etc., covering the battery, printing, electronics and precision chemical industries.